Knowledge

In bare copper wires, -some special fine gauge lines are double-grained lines or multi-stranded lines that form a single line together. Hard wires are easier to dry connect, while

We all need to know that if the same product has different brands, different quality, and different production materials, then there will be a big difference in price.

When an unwound parallel harness is bent, a single wire on the outside of the harness is stretched, a single wire on the outside of the harness is stretched, and a single wire on t

The copper rod used as the raw material of tin plated bare copper wire or bare copper wire is produced by 350,000 tons of SCR-7000 casting and rolling line produced by the southern

The process of tinned copper wire is slightly more complicated than that of bare copper wire, and the pure copper rod is drawn into silk and then a thin layer of tin is plated on t

In layman's terms, bare copper wire is like twisting two or more copper wires together to form a hemp rope. There are two types of bare copper wire: hard bare copper wire and soft

This kind of network cable is twisted pair, which is a kind of shielded network cable, with shielded crystal head. The copper wire is used to connect the iron shell that shields th

Hard wires below 10 square meters are generally single-strand wires, and household lines generally do not exceed 6 square meters. As can be seen from the difficulty of the manufact

2022 copper oxide, because copper has good electrical conductivity, so the wire and cable conductor we use together is copper, copper, but there is a problem in a humid environment

The stranding rate refers to the ratio of the difference between the actual length of a single wire and the length of the stranded pitch to the length of the stranded pitch within

The choice of copper wire needs to be observed from the appearance. Generally, good copper wire has a bright appearance, obvious damage and scratches, and no obvious oxidation reac

Warp wire stretching cold working, high tensile strength, suitable for overhead transmission lines, distribution lines, building lines of conductors.